Other than VCC-2vIP, VCC-2vDVI,
VCC-4cDVI, and VCC-4cIP modules, the rest of the Video Command
Center (VCC) video-only modules are legacy products.
However
these products are still supported and and can still be purchased
as expansions to existing systems.
New systems will not be quoted with the Video
Command Center (VCC) video products & modules.
• VCC Architecture
• VCC Modules
• Key Features
ARCHITECTURE
VCC modules are
used for computer generated signals. Each VCC
module accepts two 4x3 analog/DVI signals ranging from 640x480 (VGA) to 1600x1200
(UXGA) resolutions.
Each VCC output consists
of its inputs and any cascaded inputs from previous modules.
Each module provides both DVI and VGA outputs.
MODULES
VCC Modules include:
- VCC-2vDVI: To be used with 2 VGA/DVI
inputs
- VCC-2vIP: To be used with 2 VGA/DVI inputs
KEY FEATURES
| • |
All presentation IP modules can be cascaded
to accommodate more inputs |
| • |
Any image can be cropped and panned when used with Galaxy control software |
| • |
Any image on a stand alone module can be used as the
background for a PIP (picture in picture) |
| • |
Communication through RS-232, 422, 485, or RJ-45 |
| • |
Each image is scalable up to full screen |
| • |
Fading transitions are available when switching between
two images on stand alone modules when used with Galaxy control software |
| • |
Internal flash memory allows storage and retrieval of
saved presets |
| • |
Last saved preset will be automatically recalled when
powered on |
| • |
Opacity of the image on a standalone module can be adjusted
to make an image look transparent |
| • |
Output resolution from 852x480 to 1600x1200 / 1920x1080 |
| • |
Simultaneous DVI and RGB output |
| • |
Software is available at no additional charge |
| • |
Supports a wide range of baud rates for integration with
3rd party controllers such as AMX and Crestron |
|
